Paths of Glory

Based on the novel by Humphrey Cobb, Stanley Kubrick directed the movie Paths of Glory in 1957. Kirk Douglas plays the role of Colonel Dax, a commander of the French army in World War I. Held in their trenches against the threat of German cannons, the regiment is ordered on a suicidal mission to capture the Germans. When the mission fails, French generals order three soldiers to be tried and executed on the charge of cowardice. Dax is selected defense attorney for the chosen soldiers. Kubrick explores the political planning and selfish personal ambitions that result in battlefield slaughter and irrational executions.The movie is constant in its disapproval of war and the pleasure-seeking of military leaders who arrange the deaths of thousands from the comfort of their headquarters. In the beginning of the movie, General Mireau verbally ordered artillery fire on his own men because they had not left the trenches to attack the enemy. This order was denied because it was not written and signed by the general himself. Verbal orders cannot be given out for it could be false. With a signed order, proof is seen from the signature.General Mireau refused to sign the order and instead became very upset. His outrage brought him to the decision to kill three soldiers. A meeting was held between General Broulard, General Mireau and Colonel Dax. General Broulard wanted to execute one-hundred of his own men for cowardice. Of course Colonel Dax disagreed. Therefore, General Broulard brought the number down to a dozen. The result was to choose one man from each regiment and then execute them. There were three regiments so there would be three men randomly picked by their lieutenant.Colonel Dax then requested that he be chosen as their defense attorney. He also had the responsibility of choosing someone who would be in charge of executing these men if they plead guilty in their trial. I would say that their trial was taken place in a Kangaroo court. Kangaroo court is defined as a self-appointed tribunal that disregards or parodies existing principles of law or human rights. All three men chosen for the execution walked in the court ready to be tried with Colonel Dax as their defense attorney.The judge, along with everyone else involved, seemed to already have a decision without knowing the character of each man, evidence and what their attorney had to say. The first man who spoke before the court was a guy who admitted he made it out of the trenches and into â€Å"no man’s land†. According to him, everyone around him was left dead except for one guy who was still left standing. They both headed back to the trenches so they could stay alive. He mentioned that he probably should have moved forward but instead he retreated.The second man who spoke before the court admitted that he advanced from the trenches until he was ordered back. All the court cared about was how far he got out of the trench. They didn’t care that he was ordered to re treat. When Colonel Dax mentioned the two medals the second man received over time, they were not interested. Finally, the third man was being tried. When he was climbing out of the trench, he was knocked out â€Å"stone cold† because of a corpse that fell on him. The court showed no mercy on any of these men. They were all plead guilty and sentenced to death.How can a man be a coward if he remained alive while everyone else lay dead? Why would he or any man for that matter continue going forward alone instead of retreating back to save their own life? How is a man a coward if he is doing nothing but obeying orders? What would make a court plead someone guilty of cowardice when that person has a medal in bravery? Why would a court execute a man who never had the chance to leave the trench because he was knocked unconscious by a dead body? All of these questions had to be going through Colonel Dax’s head.General Mireau asked Colonel Dax the question, â€Å"Are you prot esting the authenticity of this court? † He replied with the answer, â€Å"Yes sir. I protest against being prevented from introducing evidence which I considered vital to the defense; the prosecution presented no witnesses; there has never been a written indictment of charges made against the defendants, and lastly, I protest against the fact that no stenographic records of this trial have been kept. The attack yesterday morning was no stain of the honor of France, and certainly no disgrace to the fighting men of this nation.But this Court Martial is such a stain, and such a disgrace. The case made against these men is a mockery of all human justice. Gentlemen of the court, to find these men guilty would be a crime, to haunt each of you till the day you die. I can’t believe that the noblest impulse for man – his compassion for another – can be completely dead here. Therefore, I humbly beg you†¦ show mercy to these men. † Later on during the mo vie, Colonel Dax summons Lieutenant Roget to his quarters and orders the officer the assignment of supervising the firing squad – a job which requires putting a bullet in each prisoners head. You’ve got the job. It’s all yours,† Colonel Dax says. Lieutenant Roget tries to back out and convince Dax he is unfit for the job since he has never done such a task. Dax feels that if Roget had the audacity to pick a soldier of being dead based on the charge of cowardice, he can uphold the responsibility of ending their life. In this scene, Colonel Dax made it a point that Lieutenant Roget made a personal decision with his own reasons instead of picking from random because he was ordered to. Why did Lieutenant Roget choose Cpl. Paris to be executed?Before the assault, Dax ordered three officers (Lieutenant Roget, Corporal Paris and Private Lejeune) to go on a reconnaissance patrol into the darkness of no-man’s-land. The lieutenant â€Å"forfeited† hims elf, leaving the other two soldiers by themselves just because he was scared. Unfortunately, Private Lejeune did not make it out alive. When Corporate Paris returns back to French lines, he enters Lieutenant’s bunker to talk with him. Roget, shocked to see Paris, says, â€Å"I thought you’d been killed. † â€Å"You didn’t wait around to find out, did you Lieutenant?I mean you ran like a rabbit after you killed Lejeune,† Corporal Paris snaps back. Lieutenant Roget did not appreciate the tone and accusations being pointed at him whatsoever. He clearly lets Paris know that he is an officer and he should never be spoken to like that. Paris continues by saying, â€Å"Oh, well, I must be mistaken then, sir. An officer wouldn’t do that. A man wouldn’t do it. Only a thing would – a sneaky, booze-guzzling, yellow-bellied rat with a bottle for a brain and a streak of spit where his spine ought to be. You’ve got yourself into a me ss, Lieutenant. Roget cynically expresses his superiority and counter-reprimands him for insubordination, threatening a superior officer, and refusing to obey an order and inciting others to do the same. Paris threatens to bring charges and accuses his superior officer of drunkenness on duty, wanton murder of one of his own men, and cowardice in the face of the enemy. That is why bringing Corporal Paris to execution was personal for Lieutenant Roget. With proof that will hopefully save the three soldiers lives from execution, Dax ask to see General Broulard to report the new information he has just learned.With disregard to the information, Broulard replies, â€Å"Maybe the attack against the Ant Hill was impossible. Perhaps it was an error of judgment on our part. On the other hand, if your men had been a little more daring, you might have taken it. Who knows? Why should we have to bear more criticism and failure than we have to? These executions will be a perfect tonic for the en tire division. There are few things more fundamentally encouraging and stimulating than seeing someone else die. You see, Colonel, troops are like children. Just as a child wants his father to be firm, troops crave discipline.And one way to maintain discipline is to shoot a man now and then. † Dax had sworn statements by the men who witnessed General Mireau ordering artillery fire on his own men during the attack. He implies that the execution would not proceed if all the court knew Mireau’s actions to fire on his own men. General Broulard is not justified in holding his position with respect because he had the choice to stop the execution but chose not to. He believes that killing three innocent men shows an example in maintaining discipline. He chose not to stop this for he did not want to look bad upon.I believe that if he would have stopped the execution like Colonel Dax wanted him too; it would not look bad on Broulard. Full responsibility would have been over Gene ral Mireau for poor judgment and the lack of morals. General Mireau made this decision based on his ego and authority. Stanley Kubrick brings in the theme class distinction by making it clear that everyone is afraid. If ranked higher in power, fear can be overlooked in the form of authority. Lower classes were shown to be located in trenches while those better off became Generals and Colonels.To those in power, other soldiers were chess pieces to their decisions. That is where Kubrick uses the theme nationalism. The cliche â€Å"means to an end† is a good example of what General Broulard believed. He believed that if three men getting executed were what it took for the rest of the regiments to follow orders, then that is what it took to be successful in the war. He made decisions on what he believed was best even if it was morally wrong. The execution gave him and General Mireau a superior patriotic feeling, and that is where Colonel Dax conflicted with both Generals.

Importance of Margins Essay

In the short essay â€Å"In Praise of Margins† Ian Frazier defines marginal people, places, or activities as â€Å"†¦ the ones that don’t quite work out† (58 Frazier) since they are insufficient to meet the standards of the economic world. However, Frazier shows he values marginal activities and places because they allow people to be themselves without the worry and judgment. For Frazier and his friends, they viewed â€Å"The woods† (56 Frazier) as their place of margin Often times society deems marginal behavior to be unbeneficial, but Frazier states â€Å"..marginal behavior can be the most important kind.†(58 Frazier) because every purpose-filled activity starts off as a margin. Nonetheless, it is crucial for marginal things to exist as they provide many benefits and play an important role in the world we live in today. Living in a society where we are constantly being told what to do , marginal activities are necessary because they can allow oneself to discover what one’s true passion is without any other influences. For example, in Annie Dillard’s â€Å"Hitting Pay Dirt† she describes the time she received a microscope kit, as a Christmas present, which she played with constantly in her basement. In the beginning, Dillard is unable to use her microscope properly, but ultimately succeeds as she sees an amoeba. Excited about what she had discovered, she immediately runs upstairs to show her parents; however, both of her parents are uninterested to what had seemed like â€Å"..a chance of a lifetime.†(95 Dillard) to Dillard. As a result, she then begins to realize that every individual has their own pursuits and â€Å"†¦that you do what you do out of your private passion for the thing itself.†(95 Dillard). Dillard explains that †[Her] days and nights were [her] own to plan and fill.†(96 Dillard) and her passions were her own and not her parents. In a world where everything is constantly evolving and expanding , margins are much needed as they are the sole reason that helps the world continue to progress. Frazier states that â€Å"†¦ marginal behavior can be the most important kind.†(Frazier 58) because it allows one to attempt new and different concepts without the needed approval of anyone else. In many cases, ideas start off as â€Å"marginal† theories, but later on can be  acknowledged as something greater. Especially in a society where we demand things frequently, we often expect immediate results, thus making marginality difficult to understand for many. For instance, Frazier uses the first person who decided to ride down a mountain trail with his bicycle as an example of someone who started off thinking he was doing a â€Å"†¦decidedly marginal thing.† (58 Frazier). However, this mountain biker’s mere â€Å"marginal† idea has become a widely known sport across the nation. Ultimately, without marginal activity the world would be unable to grow; margins are extremely important as they keep life exciting and new. In the midst of everyday busy life, one is in need of marginal things every once in a while for the purpose of sanity. Marginal things essentially allow one to relieve stress by escaping the continuous demands of society, thus enabling many to obtain a peaceful state of mind. Frazier defines marginal activities as a â€Å"higher sort of un-purpose†(57 Frazier) as marginal activities can be viewed as useless, and yet can mean so much to a each different individual. For example, Frazier and his friends find their marginal place in â€Å"The woods†(56 Frazier) since it was a location they were able to do senseless activities just for the sake of it. The woods was almost like a sanctuary to Frazier; it was a place where he was able to escape from the judgments of the outside world and the pressure of impressing anyone else. In essence, taking a break from the daily norm with marginal things prevents individuals from going insane. Altogether, according to Frazier, â€Å"marginal† places and activities should be valued as they can provide numerous benefits to not only society, but to oneself. Marginal things allow many to truly find what their passion lies in, since marginal activities are not forced upon by any other influences. In addition, marginal behavior essentially keeps our world spinning as it brings new ideas that seem to have no purpose, but later on can bring something great. Lastly, often times, one is blinded by the mentality that everything one does must have a purpose, therefore disabling one to realize the importance of marginal things as they keep us at peace. All in all, marginal things may seem worthless, but the only reason as to why they might be viewed in that sense is because of the perspective society views marginal  activities.

A Proposed Computerized Payroll System Essay

Chapter I INTRODUCTION Electricity is a naturally occurring force that exists everywhere and it is used to power many things that are used in our everyday life. Without electricity, people’s lives would be very different and in many cases more difficult. There are many ways to generate electricity; one way in producing electricity is the use of solar cells. Solar cells or photovoltaic cells are made of semiconductor materials such as silicon and designed to convert light energy into electrical energy by the photovoltaic effect. Photovoltaic effect is the basic physical process through which a solar cell converts light into electricity. Light is one of the most abundant forms of energies and by using this energy in a proper way an eco-friendly form of energy can be produced. When light energy strikes, it absorbs photons of light and releases electrons these free electrons then forms an electric current that can be used to power a load. According to The World Factbook, the world has over 5 billion mob ile phone users. In the Philippines alone, there are 92,227,000 mobile cellular telephone subscribers, placing the country in the 11th position of most number of mobile phone users in the year 2010. This fact shows that mobile phones are essential therefore the batteries are needed to be charged and one way to charge it, is through solar energy. For its commercial purpose, the solar powered mobile phone charger is designed to have a coin timer that will recognize the coin to activate the timer and the mobile phone charger. The time that it will take for the mobile phone to charge depends on the amount of money that will be inserted in the device. Through this, the materials used for the machine, like the solar calls, will be recovered. The convenience of the machine lies in its capability to be installed either indoor or outdoor locations as long as there is light that can be absorbed by the photovoltaic cells. Background of the Study From the survey given randomly to some students and employee’s most of them frequently use†¦. try dn to.. From the survey that was gathered, most people frequently usetheir mobile phones and sometimes forget to charge their phones at home; such causes them to run out of battery charge when they need  to use it outside, especially in emergency purposes. The places where they need to charge their phones the most in case of emergency are schools, hospital, mall, offices, bus stations and other terminals. For the past years, a mobile phone charger coin-operated machine already exists in the Philippines and this was stated from the article of Rey Gamboa from Philippine Star. However, this machine is usually available on public and indoor places like Ministop and 7-eleven and are powered by power grids. Therefore, the proposed design is a mobile phone charger vending machine that uses solar cells to produce electricity that will power the device without the need for outlet plugging(the power in the outlet†¦ try to†¦ ). It can be used on both indoors and outdoors as long as light is available.It may also payback the expense of the material used and the good thing is that the time span of a solar cell is about 30 years according to the studies done in 2007 by International Journal of Environmental Technology and Management. It may also payback the expenses for the materials used in having solar cells and it has a time span of more than thirty years according to the studies of the International Journal of Environmental Technology and Management in the year of 2007. trydn†¦ Statement of the Problem This project study dealt in the development of using free energy caused by light that produces electricity for the mobile phone charger. This form of transforming energy will help lessen the environmental problem such as pollution, global warming, acid rain or smog.At the same time, it paybacks the causeof the solar cells itself by using it as a solar powered mobile phone chargervending machine. The study specifically aims to answer the following questions: 1. What type and how many solar cells are needed to produce electricity that is enough to power the mobile phone charger vending machine? 2. How to design the power supply circuit necessary to power the mobile phone charger vending machine? 3. What is the position and alignment of the solar cells and also the time in which it can produce electricity efficiently? 4. How to design and develop the mobile phone charger circuit that can accommodate 2 units of mobile phones? 5. Howlong is the payback time in using solar cells to power t he mobile phone charger vending machine? Objectives of the Study The researchers’ main objective is to design and develop a solar powered mobile phone charger vending machinethat can maximize the profit of the investors that operates it. This means that this device can be installed in any areas as long as the solar cells can be exposed to sunlight which will eliminate the need of an outlet.In order to address the main objective, the following also need to be achieved: 1. To determine the type and number of solar cells needed to produce electricity that is enough to power the mobile phone charger vending machine. 2. To design the power supply circuit necessary to power the mobile phone charger vending machine. 3. To determine the position and alignment of the solar cells and also the time in which it can produce electricity efficiently. 4. To design and develop the mobile phone charger circuit that can accommodate 2 units of mobile phone. 5. To determine thepayback time in using solar cells to power the mobile phone charger vending machine. Significance of the Study People who are using mobile phones frequently are the main recipients of the benefits in this study. The need of people to charge their mobile phone because of work, emergency, or any other condition will lead them to find a mobile phone charging station. Hence, a mobile phone charging station that is powered by light energy will be a good way to harness energy from light efficiently and productively. For the environment, the device uses only the photons of light to produce electricity which means that it doesn’t need to be plugged into a power source. It can also be used inside anenclosed area where there is artificial light like bulbs or fluorescent light. However, for higher gain of electricity and efficiency it is recommended to harness sunlight’s energy because it is brighter than any other artificial light that is common in commercial and public areas. For the investors, after the device is produced, it in itself will produce electricity for it to work. Consequently,the device doesn’t need intensive maintenance, and the cost of maintenance will be less. For the future researchers, energy sources has so many forms; the way of harnessing it to its’ full potential is the only difference. This device is an example of harnessing light energy in a way that will help the producer, consumer and environment. This will help future researchers to think of topics that will not only benefit one party, but all  those who are going be involved or affected by their proposed project. For the researcher, this device is another innovation in the field of harnessing solar energy. This simply shows that solar energy can be used as an alternative source of energy in many ways. Scope and Limitations of the Study The researchers’ main concern is to design a solar powered mobile phone charger vending machine that is efficient on harnessing solar energy and can convert it to electrical energy to charge mobile phones. The device must be economically sound in a way that when it has achieved its payback period, the only thing that must be put into concern is the cost of maintenance. Since solar cells are easy to maintain, the maintenance cost is not high. The devices’ main part is the power supply that will act as the source of electricity for the device. Solar cells effective life span is 25-30 years, which makes it a very good alternative source of energy for the device to work. To design the devices’ main part, the position and slope of the solar cells must be considered depending on the location where it will be installed so that the solar cells can produce the maximum amount of electricity. This is because the amount of electricity that a solar cell can produce depends on the intensity of sunlight that is being absorbed within the semiconductor material. The number of solar cells must also be enough to produce electricity that is needed to power the device. The rated total power output of all the solar cells must also be sufficient for the mobile phone vending machine. It must also be placed on top of a roof or any high position so that shadowing, vandalism and stealing can be prevented. A battery will serve as a storage device so that the electricity that will be generated by the solar cells will be stored whenever it is not in use and the electricity that will charge the mobile phones will be constant and not fluctuate. The power supply circuit will regulate the voltage and current to its rated value that the mobile phone charger vending machine needs. The devices’ second main part is the mobile phone charger vending machine. This is composed of a mechanism that recognizes the coin that is inserted and starts the process of charging the mobile phone and also the timer. It recognizes the diameter, thickness and weight of the coin so that it can distinguish the value of the coin. The timer is programmed to start whenever a coin is inserted and it depends on the value of the coin that is inserted  on how many minutes the timer will countdown. At the same time, the charger will start charging the mobile phone until the timer ends the countdown. The devices’ third main part is the mobile phone charger circuit. This charger can charge multiple mobile phones at the same time. It is composed of different plug-ins that is commonly used for the user to choose of the plug-in that fits in his/her mobile phone. It is operated by the timer so when the timer starts to countdown, it starts to get electricity from the power supply. Theamount of voltage and current output that is needed to charge the mobile phones is suitable for nearly all brands of mobile phones. Limitations of the study The device is subjected to the following limitations: 1. In outdoors, the device only operates during daytime, approximately 6:30am – 5:30pm depending on the location as long as sunlight is available. 2. It can also be used inside a mall or commercial area that has artificial lighting system,however the amount of electricity that the solar cell can produce is not as high compared to what sunlightcan produce. 3. The plug-in that will be used to charge the mobile phones are those of Nokia. 4. Since the device only recognizes 1Php and 5Php, it can only be used in the Philippines. 5. It cannot be used outdoors when sunlight is not present specifically during rainy days or in cases when the clouds are very gloomy. 6. It cannot be used outdoors when there is a natural catastrophe or disaster. 7. The researchers will not consider the charging time of the Deep cycle battery. 8. The researcher will not consider if the mobile phone user doesn’t ends the countdown of charging his/her mobile phone.

English Essay Example | Topics and Well Written Essays - 4750 words

English - Essay Example American foreign policy has transformed to one that shifted from the traditional conservatism, to a modern liberalism that takes a keen interest in world affairs. It is also vital to note that, as a global superpower, it would be questionable for the USA to take a back seat at what is happening on the global scene... Introduction United States of America has come a long way from dealing with internal issues to one that is now a global superpower. This power is in terms of its advancement in technology, political ideology, military, culture, and society in general. Any sober mind would observe that all these were advancement the US earned after a bitter struggle by scientists, technologists, men and women in uniform and every sector of the United States. Hard work, dedication, vision and the desire to be the very best were some of the values that laid the foundation for such impressive achievements (Brooks et al., 2003). Accordingly, such advancements accelerated the shift from an iso lationist foreign policy to the current global force that the federation has earned. The years immediately after the 1865 were probably the foundation years in which unfolding events of the world put the country’s military capability to test (Arthur et al., 2007). Pockets of war that ensued after the 1865 civil war were Japan conflicts, Colombia hostilities, Uruguay conflicts, Formosa conflicts, Nicaragua and China conflicts (Arthur et al., 2007). The US responded with military action, in many cases, to protect her interests in the conflicting countries. Such conflicts were particular of smaller magnitude given that a lot of military involvement later followed that redefined the strength of the US in newer terms. Most importantly, it appears that the engagement of wars that followed later were what actually defined the position of the US in the global map in as a military power and as a leading global ideologist. These wars were the First World War, the Second World War, the Cold War, the Vietnam War, Eastern Europe wars, the Gulf war and the Middle East wars. Entering all of these wars was a test for what the United States believed in in terms of right of nations to liberty, free determination of the masses, playing neutral in external aggressions and foreign policy of non-interference with European affair. Without knowing, such wars were silently laying the foundation for a change from Isolationist policy to a new one where the United States had to be worried about the forces that surrounded her in the larger volatile world. In essence, wars and political ideologies resulted in the transition from an isolationist foreign policy, in America, to one in which the nation is now a global superpower (Arthur et al., 2007). The United States embarked on this course staring with her involvement in the WWI after the Zimmerman telegram and German’s blatant disrespect to neutral shipping (Winkler, 2000). The Road to Global Superpower When the WWI broke out in 1914, the United States policy of non-interference with European affairs kept her at bay. The war began with factions such as the Triple Entente and Triple Alliance. Fought on Europe soil predominantly, the war saw Britain, France and Russia rise in arms against offensive from German, Austria-Hungary and Italy. The US

The American civil war. Arms and Equipment of the Civil War Essay

The American civil war. Arms and Equipment of the Civil War - Essay Example Lee who served as the confederate commander surrendered. In western civilizations, wars, such as the American Civil War, are usually characterized by five essential features. These include: Technology The Armed Forces of the West have always relied on superior technology, usually to compensate for inferior numbers. In the American Civil war, there were technologies that made this conflict more lethal than other past wars that had been conducted in the United States. This was the last war in which ancient artifacts such as wooden ships were used during hostilities. It also saw the introduction of weapons such as torpedoes, Gatling Guns, ironclads, and submarines, into modern warfare. When the war first broke out, the soldiers from both the Union and Confederate sides used old smoothbore muskets.1 These weapons allowed only for slow reloading and had a firing range of approximately eighty yards. Soon the Union soldiers were outfitted with rifles, which allowed for quick reloading of bu llets and had better accuracy and a wider firing range. The Confederate army would also start utilizing these types of rifles for more effectiveness. Both armies also began to make use of a new bullet known as the ‘Minnie ball’. The Minnie ball was much easier to reload than the older bullets. While these new types of weapons were more efficient, they also caused many more casualties within a shorter time period. Minnie balls resulted in many soldiers who were not effectively killed by this contraption sustaining deep tissue damage. Unfortunately, the surgeons did not know how to effectively combat such wounds and would often cut off limbs of the affected patient in order to save his life. Another weapon that gained widespread use during the civil war is the Gatling gun- which was essentially a machine gun that was positioned on wheels. This weapon could kills tens of men while being fired and rotated to cover all sides. Discipline More in the Western civilization relie d heavily on discipline, Western military practice has always exulted discipline, rather than kinship, religion or patriotism as the primary instrument that turns bands of men as individuals into soldiers fighting as part of an organized unit.2 In the American civil war, the soldiers had to live in a structured society which had privates at the lowest rank, followed by corporals and then sergeants, second lieutenants, lieutenants, captains, majors, lieutenant colonels, and finally colonels. To keep the men in top fighting condition, there was strict discipline. Offenses as minor as disregarding camp duty and not taking good care of one’s rifle was punished by hard labor such as digging latrines and uprooting large trees. More serious offenses such as theft, insubordination, or even cowardice in the time of action were punished by forcing the errant soldier to perform activities that would humiliate them before their colleagues. For instance, men were forced to carry logs, or wear signs that proclaimed their mistakes to all. There were also offenses such as performing acts of treason, murder, and desertion for which the errant soldier would be killed by hanging or by a firing squad. These punishments would be administered by the army’s Provost Marshal. Aggressive Military Tradition Shared military theories and doctrines help soldiers to understand how to conduct major operations as well as campaigns while preparing them for service in the fields. In the American civil war, the armies utilized Jomini's war theories. Baron Jomini’s theory on war was based on major European wars such as took place in the

Law of express trust Case Study Example | Topics and Well Written Essays - 1000 words

Law of express trust - Case Study Example It may be either a person or a legal entity; iv) Beneficiary, i.e. the person for whose benefit the trust was created. v) Purpose of the trust, i.e. the trust must have a purpose, which is legally valid. Express Trusts are further broadly classified into i) Living Trust: It is also known as inter vivos trust is made for the advantage of another during the lifetime of settlor. ii) Testamentary trusts: These are created by the will of the settlor. That means, the settlor's property will be converted into trust property only after his death. iii) Revocable Trusts: It is a trust where the setlor has full control over the trust property, and he can change or annul the trust at any time. This is a trust, which is at the whims and fancy of the settlor. iv) Irrevocable Trusts: As the name implies, this is a trust, which cannot be revocable except the consent of the beneficiaries, and trustees. Moreover, the trust does not fizzle out once the purpose of the trust is fulfilled. v) Fixed Trusts: These are those trusts where the trust property will be shared by the beneficiaries as per the calendar fixed by the settlor. In distributing the property, the trustee has no discretion to play. Gartsi de v IRC [1968] AC 553 the Inland Revenue argued that as each beneficiary might be entitled to income from the trust fund, they should each be charged as if they were entitled to the whole of the fund. vi) Discretionary Trusts: They are those trusts where the trustee has absolute power in management, administration and distribution and allocating the shares of the trust property to beneficiaries. This trust offers many tax benefits to the beneficiaries, as no interest is created to them until the property is distributed. Rights of beneficiaries: Under a discretioanry trust, the rights of individual beneficiaries are not clear. In Re Smith [1928] Ch 915 it was held that the trustees had to draw up a "complete list" of beneficiaries, but this principle is changed in McPhail v Doulton [1971] A.C. 424, 451, in case of family trust. Court's Jurisdiction: Schmidt v Rosewood Trust Ltd [2003] UKPC 26, [2003] 3 All ER 76: In this case the court held that 1) The court has inherent jurisdiction to supervise and even intervene in the administration of a trust if necessary. And there is no exception even in discretionary trust. 2) This inherent jurisdiction is the fundamental of law of trust. 3) The right to seek the court's intervention did not depend on entitlement to a fixed and transmissible interest. 3) The court has the discretion to intervene to maintain the balance between the competing interest of beneficiaries, the trustees and the third parties. Gartside v IRC [1968] 1 All ER 121 at 134.Re Manisty's Settlement [1973] 2 All ER 1203 at 1211-1212, Mettoy Pension Trustees Ltd v Evans [1991] 2 All ER 513 at 549. Questions: 1. Transactions made by the trustees in the course of management of trust property: The trustees made the following three transactions: 1. Sale Vintage care for 15,000 during the last year to Crowther's son, 2. Payment of legal management fee of 25,000 to the solicitors firm in which the trustees are partners. 3. Decided to invest from existing deposits in to a) partly

Chapters question for Essentials of Health Behavior, Social and Essay - 6

Chapters question for Essentials of Health Behavior, Social and Behavioral Theory in Public Health book Mark Edberg - Essay Example An example of a strategy that can keep an intervention going consists of a number of measures. The first measure is to ensure that those who are involved in the intervention are trained to properly implement the intervention. This is followed by incorporation of community-based stakeholders who will support the program, followed by search for necessary resources for the intervention. It is also necessary to develop a link with similar intervention programs. This strategy ensures availability of resources and technical knowledge that keep an intervention going (Edberg, p. 100). Trying to implement a school based intervention policy faces a number of political issues that needs decision making and influencing others to accept the decision. The approval of the school board is one of the political issues that affect intervention as no policy can be implemented without the board’s consent. Successful implementation of an intervention also requires support from the school. This can only be achieved by political means. Similarly, choosing from many policies is another issue because resources are limited and not all policies can be implemented at the same time. Another political issue is acceptance of the policy by external stakeholders such as the community (Edberg, p. 105). The connection between schools and their communities that might affect selection of programs is the existence of the community as the schools’ environment and as a stakeholder to the schools. Because the schools are within the community, their policies are affected by behavior among students and their parents or guardians who come from the community. Another connection is the community’s interest in its children’s affairs in schools and the community’s future generations (Edberg, p. 104, 105). The major connection between workplace and the community is their ability to affect each other through employees. Workplace

Management information system ip2 Essay Example | Topics and Well Written Essays - 500 words

Management information system ip2 - Essay Example A research conducted by Greasley et al shows that the employees are able to relate to the concept of empowerment in a different way than the supervisors. The employees believe that they are provided with the responsibility of completing a certain task and this inflates them to complete the particular task in a remarkable manner. Other than the sense of responsibility, the employees also believe that they get a ‘control of work’ which provides them to manage their tasks accordingly. In other words the employees are able to work in a manner that is beneficial to both the employer and the employee himself (Greasley et al 2008). Employee Empowerment is considered as a source of high productivity by the supervisors. The supervisors can provide the employees with work and can create a unified goal which helps in increasing the productivity at a large scale. The supervisor is able to motivate the employee and hence optimize the performance in accordance to the needs. The supervisor tends to feel safe when handing the employees work because he/she believes that the employee would be able to take the responsibility on his own. In other words the level of trust increases between the supervisor and the employee (Potterfield 1999 p.123-124; Lashley p. 62-64). The theory X of management and decision-making process revolves around an authoritative form of leadership in which the managers hold the sole authority of making decisions whereas the theory Y states that the employees have an equal say in the decision making process. Employee Empowerment is a concept that relates to the theory Y as the managers give equal options to the employees when it comes to make decisions. Theory Y states that the managers should coach the employees in such a way that they are able to make their decisions with confidence and employee empowerment automatically instills confidence in the employees (Griffin 2012 p.39). Employee Empowerment

Acquisition Analysis Essay Example | Topics and Well Written Essays - 1750 words

Acquisition Analysis - Essay Example Such factors as internal and external market environment as well as Adobe priorities were examined, and it was found that acquisition is profitable for both companies. The three templates were designed to analyze broad, specific and other issues necessary to evaluate the risk and profitability of the project. It was supposed that the company IAP will invest about $ 1000000 from internal cash funds. Financial analysis proves that fact that the rate of return will be high if IAP invests $ 1,000000. Such calculations as WACC, risk assessment, CAPM, foreign currency translation effect, cash flow analysis have been madeThe initial assessment of markets conditions involves screening foreign markets to discover the potential of different countries. This process includes consideration of rates of growth of economies, new developments such as opening up of markets in developing and emergent economies, technical changes that are creating new opportunities to sell and identification of long-ter m economic and demographic factors that are altering demand patterns.With the globalization of the world economy, companies like IAP Company Limited are growing by merger and acquisition in a bid to expand operations and remain competitive. The complexity of such transactions often makes it difficult to assess all risk exposures and liabilities, and requires the skills of a specialist advisor. Four main types of assessment for companies considering acquisition beyond their national borders should be undertaken: political and legal conditions, economic conditions, cultural conditions, competitive conditions. USA-based company Adobe operates in the stable political situation, which has high rates of economic growth. Acquisition policy is undoubtedly the most radical growth strategy open to management in that it represents a deliberate attempt to change the nature of the business. Acquisition policy can be classified into backward, forward and horizontal integration. Acquisition policy occurs when the new business is related in some way to the old one. (Zolkiewski, 1994). Template 1: IAP Company Limited will be reluctant to enter countries that have high political risks unless the potential returns are high or when countries with high political risk are providers of raw material that are in short supply. When the overall market is growing or can be induced to grow, it may be relatively easy for companies with a small market share, or even new entrants, to gain share. This is because the absolute level of sales of the established companies may still be growing; and indeed, in some instances, those companies may be unable or unwilling to meet the new demand. Import penetration into some industries can be traced back to the early 1990s, when companies were unable to supply the peak demand occurring during booms and their customers had to seek alternative sources overseas (Benito, Gripsrund, 1992). Once established with overseas suppliers, many UK users were reluctant to revert to UK sourcing. When the boom was over, the importers held on to their market share. The size of the investment required by a business wishing to enter industry will be an important determinant of the extent new entrants. Acquisition with Adobe allows IAP Company Limited to subject to a complex regulate framework whereas others are less so. Still, even if it is possible to predict the needs of customer there are some threats and new opportunities, which should be taken into consideration. American administrative and legal environment is very favourable for acquisition with Adobe. There are no specific regulations governing the goals and structures of the industry, there is

Ancient civilization Essay Example for Free

Ancient civilization Essay Ancient civilization was characterized with a culture that was rich in content, and embraced all aspects of human life. Religion for instance was so much emphasized as the basic support to human life. Assyrian winged protective deities were Egyptian religious figures. The chapel of Sekhem-ank-ptah is another unique aspect of history and has its weight on the wall hangings which had various writing inscribed on them. Lamassu, which is also known as lama is one of the Assyrian deities which had an obligation of protecting the people. This religious power existed between C883-613 in the Assyrian territory. The religious wall hangings found in the chapel of sekhen-ank-ptah has close similarity to Lama. All of them existed to in the ancient days with the wall hangings dating back to 2450 to 2350 BC. The region of existence of the wall hangings was however Sakkara in the late dynasty 5 (Tomasi, M. 2006). The two unique powers had varying representations. Lama was displayed as a large bull with horns and was always placed as a monument at the entrance of palaces. The gender of Lama was of the form of human males. Great artists always confirmed that the Assyrian deities with wings were actually apotropaic figures. Wall hangings on the other hands were made using thick papyrus which was obtained from swamps, lots of drawings were posted on the wall hangings and these drawings had various interpretations of divine nature. One similarity however is the material used to make them. All were made using sacred items. Lamassa represented a standing figure and served as a servant to a superior god. This meant that all visitors of the superior god were welcomed by the lame. Lama also had one great duty of protecting people against evil forces. The wall hangings on the other hands acted as a reminder of the baths to be taken in life. Some parts of the wall; hanging represented the process of giving offerings in church. The pictures had diagrams of animals in motion. Al these had interpretation. For example, the wall hanging on butchers at work and that showing plants in the field had an interpretation that the people were mainly farmers. Generosity in terms of giving food is also an output obtained form this diagram. The ancient Assyrian people believed in these symbols of deity and followed the beliefs carefully. Any violation of the precepts was believed to bring curses both then and the generation that followed

Analysis Of The Mare Chicose Landfill Environmental Sciences Essay

Analysis Of The Mare Chicose Landfill Environmental Sciences Essay The purpose of this research was to have an overview of how a landfill is being managed. To be more knowledgeable of the techniques that is being put in practice for a good management. In addition, to identify the negative effects of landfill to workers, the population and environments. A site visit at Mare Chicose Landfill was conducted for that purpose. With the help of an Engineer the details were being explained and thus help in the refi nining of our checklist From the results, two important points were found: Landfill Gas and leachate pond which are major factors which need more attention to avoid negative effects. A Landfill which is not properly managed causes a lot of problems to the health, contamination of ground water, odours, and many health effects. 1.1 Objective of the research A site visit was conducted at Mare Chicose Landfill, in order to have an overview of how a landfill is managed. The purpose of the visit consists of identifying the hazards of the landfill present with evaluation and calculation of the risks. Furthermore, the control measures that are being adopted and to determine if the measures are adequate. 2. Literature Review 2.1 Definition of waste According to Taylor and Allen (1) any material which is of no further use can be regarded as waste. Human activities produced wastes materials. Waste management philosophies outlined that most wastes can be reused or recycled. Waste can be classified into solid, liquid, gaseous. Sources of solid wastes include residential, commercial, institutional, construction and demolition, municipal wastes, treatment plant sites, industrial, agricultural (Tchobanoglous 1993). With the increase in population rate during the last decades, the generation of waste has accelerated, due to industrialization and urbanization and furthermore, with the developments of technology and science also (Cardinali Richard, 2001). Increase in standard of living has given rise to waste generation and efficient and effective control measures need to be implemented so as not to deteriorate the health of people and the environment (Khalil Nadeem, Khan Mubashra, 2009). It has been a great concern and much attention ha s been given internationally on this issue. Each country has different waste hierarchy and options due to different geography, cultures, environment among others. (Pitt Michael, 2005). According to a recent study carried out in UK (reported in Recycling World, October 2000) Austria, Netherlands, Sweden, Germany growth in recovery and recycling exceeds the growth in waste. Followed by Denmark and Switzerland but in the slow lane are France, UK, and Norway where there use of landfill has increased. (Cardinali Richard, 2001). 2.2 Integrated Solid Waste Management and Waste Hierarchy Therefore in the light of these growing concerns many professionals have proposed theories and solutions as to how the pollution can be minimized (Halawani et al.1993).Also, in an attempt to reduce the final volumes of wastes and to have sufficient funds for waste management the recycling process and recovery material can be used to get funds for waste management; whereby, the Integrated Solid Waste Management (ISWM) comes into the picture. Integrated Solid Waste Management (ISWM) is a framework that helps us to understand waste management and most importantly how to reduce wastes. (1):http://www.Taylor and Allen Therefore, it proposes a Waste Management Hierarchy for the best solution that put waste management options in order of sustainability, from the most favoured option to the least desired one. (Shown in figure 1).The Waste Management Hierarchy is a list of approaches to managing waste, arranged in order of preferability. The Environmental Protection Acts of most Australian States treats the Waste Hierarchy as a core principle and the UK Environment Agency supports the Waste Hierarchy as a general guide to selecting the best option for dealing with waste.   However, despite the fact that it is widely used throughout the developed world, some critics have questioned the effectiveness of the model is actually implemented.   For instance, in Australia implementation of the hierarchy has been patchy, with most effort to date focused on recycling and composting (Gertsakis and Lewis, 2003).   Figure 1: Sustainability and The Waste Management Hierarchy (adapted from J.Gertsakis and H Lewis, 2003) Also in an attempt to reduce waste, the chairman of the US Senate Environment and Public Works committee, suggest that manufacturers must take full responsibility of their products from the whole life cycle of the products and when it becomes waste also thus reducing the burdens on the municipalities (Cardinali, 2001). Both the developed and developing countries have experienced accidents due to releases of hazardous wastes(UNEP,1994,FEPA,1991:Shaw,1992)At the international level, the awareness regarding waste began in 1992 with the Rio Conference, where efficient handling of waste was priority of the Agenda 21.The Johannesburg World Summit on Sustainable Development in 2002 focused on initiatives to accelerate the shift to sustainable consumption and production and the reduction of resource degradation, pollution and waste by giving priority to waste reduction recycling, reuse followed by the safe disposal of waste .Therefore, as a measure of precaution it is in the best interest for most countries to make landfill as the last resort and option. 2.3 Overview of Landfills Landfill is the cheapest method for disposal of waste: it is immensely used by many countries. Solid wastes, is any unwanted or discarded solid item. Municipal Solid Waste comes from homes, businesses and other urban areas. But the heavy dependency on the landfill has led to filling up of most landfill sites. Example in America before 1988, 80% of MSW were disposed of in landfills. By 2009 four or five landfills in operation will be full and the cost of a new one cost approximately $90 million (Anonymous, 1992). According to Dr. W.L. Rathje, a garbologist at the University of Arizona, he gave this shocking testimony to the scale of modern landfills at a governmental hearing, quoting that: I was told that the largest monument ever built by a New World civilization was the Temple of the Sun, built in Mexico about 2000 years ago. It occupied thirty million cubic feet. I can still remember my shock when my students told me that A San Francisco landfill, made up of two mounds compiled since 1977 solely out of cover dirt and the MSW from three cities, held seventy million cubic feet, a total of nearly five Sun Temples. Landfills are clearly the largest refuse heaps in the world. Since land is a scarce resource, therefore the European union has sensitized many countries on the need to use sustainable methods .In this context therefore, the waste hierarchy (consisting of waste minimization, reuse, recovery; recovery such as energy recovery from incineration and finally disposal to landfill) and the BPEO (Best Practicable Environmental Option) are widely encourage to be used. Even though the amount of waste has diminished still the amounts of waste disposed of to landfill have increased (Pitt Michael, 2005). 2.31 Zero landfill Zero waste is a philosophy that promotes the redesign of resource life cycles so that all products are reused. Any wastes sent to landfills are minimal. Zero waste is not only about recycling but also avoiding landfills and preventing from waste production itself. The paradox is that the proportion of waste going into landfill may decrease but the volumes of Municipal solid waste are increasing ant that too in excess of 3 percent yearly for many developed nations (Douglas, 1992). The concept of zero landfill can never be achieved fully because there will be still a minimum of waste generated therefore landfill will always continue to exist. 2.32 Landfill Management: After being landfilled the waste decomposes into chemical and biological processes normally taking more than 50 years. But during the degradation process the solid waste generates 0.2 m3 of contaminated wastewater known as leachate, which in turn depending on the climate (amount of rainfall) and types of waste its colour varies from black to brown .Rainfall plays a very important role in creating leachates. Factors affecting leachates are: age, precipitation, seasonal weather variation, waste types and composition. Leachate include several parameters such as COD,BOD5, organic carbon, ammonia nitrogen , chlorides, iron manganese, phenols and AOX but little or no phosphorus.(2).Therefore pretreatment of leachate is vital. Treatment of leachate constitutes of: Leachate chanelling: Combined treatment with domestic sewage, Recycling, Biological treatment: aerobic or anaerobic, chemical precipitation: to remove high strength of ammonium nitrogen. CW (constructed wetland) is, however, a rel atively new approach to eliminating environmental pollution, based on purification of waste waters with halophytes planted in an artificial wetland and employing the self-cleaning ability of ecosystems for its biological treatment process. Presently, some hundred CWs are in operation in Europe (Bulc et al., 1998) Capping: Once cell is filled to maximum of waste, it is covered to prevent the entry of precipitation (rainfall) and the escape of gas, odour and introduction of further leachate. Moreover, can place soil over the capping or covering for a better protection. Two types of sealing liner: polymeric geomembranes and geosynthetic clay liners. Caps should include a drainage layer above and a gas collection layer between the caps lining system. Leachate pond affect groundwater if leakage. More polluted groundwater will be discharged into streams wetlands and lakes. 2.33 Landfill Gas and Flaring It is formed from the biodegradation of wastes. It normally occurs at elevated temperatures and eventually it will be saturated with water vapour. The major components of LFG are methane and carbon dioxide. Methane is an odourless gas and travelling away from sites can cause landfills fires when combines with air in certain proportions. Three processes by which landfill gas occurs; Bacterial decomposition, volatilization, and chemical reactions. The volume of landfill gas produced at a site depends on these factors: waste composition, age of refuse, presence of oxygen in the landfill, moisture content, and temperature. Source (2): http:www.scitopics.com Figure 2: Typical Gas Composition at an engineered Landfill Site. (Adapted from Environment Agency November 2002) The purpose of landfill gas flaring is to dispose of the flammable constituents safely and furthermore to avoid negative effects caused by odours, Care must be taken in the management of LFG so as to; Reduce impact on air quality; Gas does not spread beyond the perimeter of the site, to avoid landfill fires, to permit energy recovery and also to avoid odour and health risks. 2.34 Important points to be considered in the design of a landfill and facilities required inside the landfill are: Nature and quantities of waste, water control, operational and restoration requirements, construction effects must be considered ,risk assessment, protection of soil and water, leachate management, gas control and Environmental nuisances. Moreover, the access of the landfill, the opening hours, types of wastes accepted should be marked and displayed at the entrance. In addition to that provision of an office plus the first aid area, bathing and toilet facilities, lockers, mess rooms, waste reception area ,store, parking area and a wheel clearer is essential for preventing mud from being carried out on the public road lastly the provision of adequate water supply in case of fire. 2.35 Health effects on Landfilling Landfills should be the last resorts due to the scarcity of lands and many health problems encountered through it. There is a large body of literature on the potential adverse health effects of different waste management options. Example in a research done by (Saffron Lisa, 2003) it has been found that 220 papers have been published about the health effects from landfill sites. Many studies have been made on human populations about the hazards to health from landfill sites (Pitt Michael, 2005) but 101 are based on health impacts of landfill sites and 23 about health impacts of contaminated drinking water. Six papers discovered the evidence linking health effects with landfill sites. (Vrijheid M, 2000), revealed that health problems associated include respiratory symptoms, irritation of the skin, nose and eyes, gastrointestinal problems, fatigue, headaches. Environmental (Vrijheid M, 2000).These studies was conducted in order to look for a link between landfill sites and the following health outcomes: Reproductive outcomes(31studies),Cancer(29), psychosocial impacts(19), health problem not specified in abstract(14),mortality(5), injuries poisoning(2).Also EPA, revealed that many problems which occurred are because of the poor management of landfills. Most often theses problems are long term and include possible contamination of the groundwater and surface water regimes, among others. According to recent research, it was found that women who live near landfill sites has an elevated risk of having a baby with congenital malformations and also suffers from stress, fatigues, headaches, eye infections or irritations, coughs, stuffy noise, dry throat, and nausea and spontaneous abortions.(www://bmj.com).Also the other health impacts associated according to another research done by an international journal (Saffron lisa et al. ,2003) revealed that there is an increased risk of contracting cancer and also it contribute to global warming and loss of biodiversity as well and the depletion of non-renewable resources. In addition, mentioned was made in this journal that people living near and far off the sites contracts nearly same types of health problems. Each people immune systems are different; one can be more resistant while the others can be less. Research on Landfill site in Nant-y-Gwyddon revealed that an increase rate in congenital abnormalities in residents near the site, but it has been challenged by (Roberts et al: 2000).They were also suffering from stress, fatigues, headaches, eye infections or irritation, coughs, stuffy nose, dry throat and nausea and spontaneous abortions. Also the birth prevalence of gastoschisis seems to be increasing internally and nationally. The main weakness of the studies about landfill health effects is the complete lack of exposure data. Where the hazards from landfill sites have been identified, as is the case in the National Priorities List sites in the USA, it is possible to estimate exposure using the EPA Human Exposure Model (Wolfinger, 1989). The results of this type of analysis are uncertain and are based on risky assumptions. These remain estimates, not data. Most often theses problems are long term and include possible contamination of the groundwater and surface water regimes, odour, noise and visual nuisances (EPA). In an international journal (Saffron lisa,2003) revealed that there is an increased risk of contracting cancer and also it contribute to global warming and loss of biodiversity as well and the depletion of non-renewable resources, mentioned was made in this journal that people living near and far off the sites contracts nearly same types of health problems. Each people immune systems are different; one can be more resistant while the others can be less. Figure3: Components of landfill (adapted from Department of Environmental Conservation New York) The above figure shows the components and how the landfill has been design considering the different layers from the top to the bottom. In order to promote rainfall run-off away from the landfill a 24-inch thick barrier protection layer composition of soil and overlying 6 inches of vegetation topsoil serve to prevent the underlying geomembrane. To avoid again infiltration of rainfall a 60 mm geomenbrane along with the underlying low permeability clay layer are placed, thus this is done to avoid generation of additional leachate. Sand or gravel together with pipe lines are being placed so as to collect landfill gasses generated by decomposition waste. It is then followed by the waste mass, where all the waste is stock till decomposition. It is obvious that waste which contains water generate leachate therefore a primary leachate collection with pipe in place, so as to prevent the contamination of deep water sources a 60mm thick geomembrane underlines the leachate collection system and on the bottom of landfill syrong textile component to make a composite liner. However, another secondary leachate collection pipe is present after structural fill to avoid completely the leachate underground contamination. The final is a plastic geomembrane is to protect again the soil and the deep water sources. This design serves to protect the environment from contaminants which may be present in the municipal solid waste. The landfill siting plan, which prevents the siting of landfills in environmentally sensitive areas, as well as on-site environmental monitoring systems, which monitor for any sign of groundwater contamination and for landfill gas, provide additional safeguard. 2.36 Specifically Engineered Landfill (Basel Convention UNEP) At the start of the project, proper planning shall be carried out considering that the landfill would not cause harm either to people or environment. Therefore high standard of controlling measures shall be put in place and establish control procedures which would monitor and even anticipate what to do after all cells have been filled. Hazardous waste must be disposed off before reaching the landfill and it can be done by either incineration or physio chemical processors. 2.37 Health and safety aspects associated with solid waste management All activities in solid waste management involve risk. From the place of collection to the final stage in landfill risk is directly associated. However, we need to quantify the risk and identify the main hazard which may cause harm to people thus having a direct impact on the business. Risk which exists and is liable to cause damage to our health safety and even welfare and can be categorized in the following context: Disease, injuries and accident Disease -Illnesses which comprise of infectious disease, allergies, respiratory damage and even cancer. Some disease is derived from direct injections of infectious micro-organisms, others involve infection through contamination of the food chain, whereby animals or other vectors have ingested infectious micro-organisms Injuries joint and spinal damage, fractures, puncture wounds, damage to eyes and ears and other part of the body Accidents- slides from unstable disposal piles, cave-ins of disposal site surfaces, fires, explosions, being caught in processing equipment, and being run over by mobile equipment The workers are greatly exposed to the various risk at the landfill are specially, those who get involves in the segagation process. This practice is good for the recycling processes but its health consequence is beard up by workers. Those workers are exposed to fecal matters, saturated toxic materials, bottle with chemical residues, metals containers with residues pesticides and solvents, needle and bandages from hospital, battery containing heavy metals, not to forget the pollution caused by the mechanical vehicles which is inhale by the workers. Moving into more details the occupational illnesses and health consequences which cause tremendous nuisance to the workers exposed in a landfill are:- The risk of vibration from heavy vehicles cause damage to the back and joint also the lifting of waste fill containers can damage our spine in the long run and if over- exposed very detrimental in the short run From our respiratory ingestion of particulates bio-aerosol, and volatile organic are penetrated in our system through our routes of entry Infection are being caused from direct contact with contamination material, dog and rodent bites, or eating of waste fed animals Wounds punctured or bruised can contribute or cause health problems like tetanus, hepatitis, and HIV infections. Frequent head and nausea are caused from anoxic condition where disposal sites have high methane, CO2 and carbon monoxide. The consequences of burning metals arise the risk of lead poisoning.(Sandra Cointreau,2006) 2.38 The need for risk assessment in a landfill Risk assessment is important in a landfill as it contributes in the planning process. Strategic goals are being evaluated based on the risk assessment carried out. The identification of hazards is essential so as to mitigate the various risks present in the landfill. Engineering and administrative control would be based on the risk assessment done and this show the gravity or severity of the hazard present in the landfill. This is done in order to mitigate the negative impact on environment. Risk assessment in a landfill would comprise of undergoing to find ways how to control or even reduce the deterioration of ecological system, As the analysis of two major areas: Adverse health and environmental effects of exposure to hazardous chemical and failure of complex technological system. The risk assessment of a landfill should take place well in advance before it is in operation and this analysis would identify the various problem which may crop up and predict or design ways how to mitigate risk and find appropriate control measure. Nevertheless, the ecological risk assessment and the engineering risk assessment must be combining under one main component which is the environmental risk assessment. Developing the risk assessment we should know:- What are types of waste we are dealing are they harmful? We must know who are exposed to those hazards(people, animals, aquatic life etc) (3)To what extent it is affecting environment (magnitude, frequency)? (4)Is there the need to provide corrective measures? Risk assessment involvement in the landfill would be a continuous process and it shall be carried out even after its closure. So, this evaluation exercise predicts and illustrates preventive measures for the environment. (TE Butt, 2008) 3 METHODOLOGY: HEALTH AND SAFETY TOUR AT MARE CHICOSE SANITARY LANDFILL 3.1 OBJECTIVE A site visit was organized on 29/09/10 at Mare Chicose sanitary landfill. The purpose of the visit was to see the geographical location of the landfill, understand the management operations, vehicular movement control, and plant installations requirements and identify the hazards with evaluation of the risks present in the landfill. A checklist was formerly prepared prior to the visit on the hazards. Most of the work was adopted from Hobart City Council/Environmental aspects register (3) 3.2 OBSERVATIONS The Mare Chicose sanitary landfill is the only engineered landfill of Mauritius and it covers an area of about 32 hectares of land. It is operational since November 2007 and is managed by sotravic ltee. The sanitary landfill has been constructed with a designed capacity of about 20,000 tons of solid waste. It was scheduled during design stage to receive about 300 tons of waste daily but actually receive 1200 ton per day. The five cells of the landfill as at to date are full. The construction of a 6th cell is under construction to respond to the increasing demand of waste disposal which include municipal waste, textile waste, tyres and papers. At the construction phase, precautionary measures have been taken not to contaminate underground water table. The bed is protected by a layer of high density polyethylene impermeable membrane followed by 400g/m2 three layers of non woven geotextile. Above it follows a thick layer of aggregates of size 32mm which is finally covered by another layer of 1.5mm geotextile. In between are located leachate pipes whose functions are to collect the liquid leachate to a leachate pond. In the design of the main pipes for leachate, the annual rainfall factor has been considered so that the accumulated rainfall on the bed is properly disposed off. Management of leachate is very important to ensure that there is no run out in drains and neighboring fields and cause environmental concern. Leachate also produce odour which is reduced with use of synthetic cover made of biodegradable plastic on top of the solid waste. (3): source http://www.risk assessement landfill The depth of the landfill is usually 4m. However the solid wastes are piled up to a height of 25 to 50m above ground level and are protected again on top with another layers of geotextile membranes, aggregates, sub soil and top soil which prevents infiltration of rain water in the disposed waste. Most of the disposed wastes in the landfill are organic and the settlement of the waste in the present cells will be about 6 metre over 15 years. It should be noted that methane gas is produced in dangerous concentration at bottom as a byproduct during decomposition of the waste in anaerobic condition. This gas has a green house effect and is managed through a flaring system: the gas is captured by aspiration from bottom of the landfill through a 460mm diameter slotted pipe to prevent its direct migration into the air. Methane is collected in a gas flare plant which has a capacity of 1500 m3 of gas per hour. It receives the gas through gas well chambers which are located on top of the capping. One gas well chambers cover a radius of 40m of the capped landfill. The captured methane gas is either used to produce electricity or is released into the atmosphere as carbon dioxide after the flaring process. The following analysis is done on monthly basis to prevent environmental problem: ,Leachate, Surface water for storm water monitoring, Underground water table and boreholes, air monitoring through gas analyser for CH4, CO2, and O2 (every three month), noise ,dust. The following health and safety measures have been taken at the landfill: The 50 workers posted are vaccinated against Tetanus and Hepatitis at intervals of six months. Regular health surveillance/medical checkup by a medical practitioner. Protective equipment provided: Earmuff, rubber boot, respiratory mask and eye goggle. All loaders/compacters in use are air conditioned and the machines are designed such that there is no risk of overturning. The landfill is a restricted area and access is authorized only with permission from Ministry of Local Government. All staff are trained in fire safety and first aid No work normally done inside waste- breathing apparatus is used if required. No radioactive waste, acids and medical waste are accepted. All liquid waste are directed to St Martin. All electronic waste are disposed off in separate concrete basin known as encapsulation. All asbestos are received only in sealed bags and disposed off deep in trenches and properly backfilled. A risk assessment was carried out during the health and safety tour at the sanitary landfill. The hazards identified have been evaluated in terms of its likelihood that a problem may occur and the damage it might cause. The consequences or potential severity of injury or damage, measured on a scale has also been assessed and a risk score given by multiplying the likelihood scale with the severity scale. The risk assessment carried out is quantitative and has been adapted from the five steps to risk assessment from the Health and Safety Executive. The steps are as follows: STEP ONE- Identifying the hazards STEP TWO Determine the risk or decide who might be harmed. STEP THREE Evaluate if the risk is tolerable. STEP FOUR Record the findings and prepare risk control plan. STEP FIVE Review the assessment if there is change in any work procedure/equipment. 3.3 RISK ASSESSMENT AT MARE CHICOSE For the purpose of this project, the following definition has been considered: HAZARD Hazard is defined as a source of inherent potential to cause harm or damage or injury. RISK Risk is defined as the likelihood/probability of the harm or damage or injury occurring. The risk assessment was carried out to evaluate the environmental and occupational hazards present on the landfill to determine the level of action required to reduce the risks to an acceptable level. When evaluating the risks imposed by the hazard, we have considered both the likelihood and severity of the event happening. LIKELIHOOD This is defined as the chance of an event actually occurring. When making an assessment of likelihood, we established which of the following categories most closely describes the likelihood of the hazardous event occurring: Very Likely Could happen frequently Likely Could happen occasionally Unlikely Could happen, but only rarely Very Unlikely Could happen but probably never will SEVERITY Severity is defined as a measure of the expected consequence should an accident occur. When assessing the consequences of an accident, the most severe category one could reasonably expect to result from that accident has been selected. The severity is categorized as follows: Major injuries irreversible injury and Death Moderate injuries a serious injury or damage to health requiring extended time off work to effect best recovery. Minor injuries a reversible injury or damage to health needing several days away from work to recover. Recovery would be full and permanent. Insignificant Injuries-require first aid only and may need the remainder of the work period or shift off before being able to return to work. Requires no action to control.When making the risk assessment, all aspects of likelihood and severity has been taken into consideration. The interrelated parameters of likelihood and severity has been defined as risk score and any score of 9 and above is rated as unacceptable or of significant risk requiring immediate action with implementation of important control measures. CONTROL MEASURES Control measures are defined as corrective measures already in place to reduce the risk at an acceptable level. Consideration shall also be taken that these control measures are either engineering or administrative. However, some other control measures do exists but it all depends on the financial position of the organization and also to what extent are the control measures appropriate for the hazard present. These control measure are adopted in order to either eliminate completely the hazard or to mitigate the hazards. Implemented by whom and when The health and safety officer shall propose to management the measure to be taken and who responsible to implement the control measure. Also, depending on the urgency and the degree of risk that the environment is exposed to, a time frame shall be established. Thus, in any work which has been delegated by the management to the department concern, the latter shall be responsible and also accountable in time limit proposed. VISIT TO MARE CHICOSE SANITARY LANDFILL SITE (Risk Assessment carried out on 29/09/10) LIKELIHOOD: 1=Very unlikely 2=unlikely 3=likely 4=very likely. SEVERITY: 1=Insigni

A Research Brief And Research Proposal Marketing Essay

A Research Brief And Research Proposal Marketing Essay The Long Mynd Tea Company TLMTC is a leading player in the specialty and green tea market in United Kingdom. UK, with a market share of 63%, is the largest tea consuming market in Western Europe (Tropical Commodity Coalition). Tea consumption in UK was pegged at 31,000 tonnes in the year 2008. Our internal Long Mynd Business Intelligence Unit LMBIU has indicated that global supply deficits in 2010 mostly attributed to severe droughts in Kenya and India in 2009 resulted in global tea prices hitting a historical high in 2009. This resulted in Unilevers PG Tips being priced 28% higher than a year ago, while Tetley was pegged at 7% more expensive (Euromonitor). Business Issues The demand for tea in UK has been healthy but rising prices in the market can lead to fall in demand especially for specialty tea which is priced slightly higher than regular tea. TLMTC recognizes the issue and to counter and differentiate its offering we plan to introduce a unique range of product, herbal and fruit tea-bags under the brand name Revive. Revive offers a unique feature to consumers in the new range of teabags which is the shape of the bags. The company is planning to use an innovative manufacturing process to craft the tea-bags in irregular shapes which involves only minimum wastage. The new bag is designed in a unique flower shape. The product will be distributed through the existing delivery channels of hypermarkets and supermarkets. We will also tie-up with large cafà © chains to distribute the product. We plan to promote the launch by an aggressive campaign involving magazine and posters in the Autumn of 2011. The key message in the ads will be around the unique shape and attempt to tie it to herbal and health connotations. The ads will also carry the message of good taste of the tea. Research Objectives TLMTC wants to know whether the unique shape of the tea-bag and the taste of the tea are appealing to consumers. We want to test the hypothesis that the consumers perceive the package as a differentiating factor. We are also interested in validating the hypothesis that the taste of the new product will be accepted by consumers. The exploration of these aspects will help us make any possible changes to the product and communication. We also assume that consumers will associate the floral shape to herbs and healthiness. The study should provide us with a clear understanding of how the consumers perceive the packaging as a differentiator. It should also give us clear guidelines on what are the positive and negative perceptions about the new pack. We expect to get recommendations in form of a programme of research to guide us through the launch of Revive. Deliverables We expect to receive a complete report of the research in 4 hard copies and an electronic version of the report to be submitted at the LMBIU office at our corporate headquarters. We also require the research agency to submit a PowerPoint presentation and present it to the marketing team at our offices 1 week after the final report is submitted. Limitations Timing: TLMTC wants to have the final report ready by no later than 3rd week of July 2011. The marketing team would first review and approve the report. Thereafter, the agency would need to present the key research findings to the marketing team latest by the last week of July2011. Budget: The budget that we are willing to allocate to the project is no more than  £60,000. This includes any sum spent on travel and other activities to finish the project. Location: Revive will be launched nationally in UK and hence we want the research to be carried throughout the country in all major cities. Proposal Submission Information TLMTC expects a research proposal from the research agency in 2 weeks from the date of receiving research brief. The proposal should be submitted electronically to us, in attention to our marketing manager. Research Proposal for Revive By Insights Consulting Limited Background Long Mynd Tea Company TLMTC, a leading specialty tea company in United Kingdom, is looking to innovate and introduce a unique range of herbal and fruit tea bags under the brand name Revive. To help them with the exercise, TLMTC has approached the Insights Consulting team to submit a Research Proposal for the study. We understand that you want to primarily assess consumer perception of the flower shaped tea bags, which is essentially the prime differentiating factor of the new range, as well as evaluate whether the taste of the new range appeal to consumers. Tea is a very versatile and competitive category in United Kingdom and hence a deep understanding of the category in general and consumer attitude towards the product in particular needs to be presented in the study (Wilson, 2008). The following outlines our approach to the study in terms of research objectives, scope of the analysis, timelines and budget for the same. Objectives To understand the consumer preference and attitude towards the new brand of tea-bags being launched by TLMTC on two parameters namely; consumer appeal for the innovative shape of bags and taste of the product. By means of the study we will provide you with a complete programme of research (data acquisition and analytics) to guide them through the launch of the product. The report will also provide guidelines on any changes that we deem necessary to make the product more appealing to the target consumer group. The report will also provide leads on consumer perception that will help your marketing team to develop the correct strategy/message to be communicated to consumers though advertisement campaigns. Methodology Research Design Insights Consulting proposes to conduct the study to gauge the appeal for the taste and packaging among the target consumers. As the product is meant for the health conscious group, research would be carried out among those aged between 18-55 years representing Young adults (18-29 years), Older adults (30-40 years) and Middle-aged (41-55 years) consumers. We understand from secondary sources that for the TLMTCs product segment, which is herbal teas, to become main segment there is a need for continued innovation around flavour in order to improve the taste of the product. As of now, regular tea is consumed by around 22 million of the UK population and more than half (56%) have experimented with herbal tea but its taste did not appeal to them (Mintel, 2011). To have a better understanding of the complex consumer preferences, we suggest an optimum combination of both qualitative and quantitative tests to meet the objectives of the study. Following are the recommended methods: Focus Group Discussions We propose to conduct in total 9 Focus group discussions in the 3 major cities of United Kingdom which will provide us with a good representation of the target market London, Manchester and Glasgow, 3 in each city such that it covers all age bands. The Focus group discussion would be led by a moderator while a panel of experts would be present to measure the emotional/ subconscious reactions of the participants. The participants would be first shown the new tea bags and the moderator would direct questions around the first reaction of the participants, would they like to buy and use it, do they perceive the product to be healthy to understand if the health platform will work for the product, would they be ready to pay a premium for the unique offering, would they include the offering in their daily diet, what would be the likelihood of repeat purchase and most important of all; their suggestions on the product and its unique packaging. Tea is seen as a healthy drink with high antioxidant content which claims to have slimming effects (University of Maryland, 2010). We understand from other studies that women prefer herbal tea as compared to their male counterparts (DailyMail, 2011). The FGDs will try to understand this angle as well and try to find if there is a special need of this consumer segment which can be addressed by the product in its current form or with any variants. Taste Test The participants would then be requested to taste the product and the next round of discussions would be directed to that aspect. It would again assess the first reaction, how they would like to consume it, would they be ready to pay a premium for this experience, etc. It is also very important to assess that the health connotation does not intervene with the taste experience of consumers. The taste test will also provide us insights into how different consumers perceive Revive as compared to the other brands available in the market. The moderator can also test the possibility of certain flavours and variety (Hot/ Iced) which the participants might seek. Projective Techniques We also propose to use Projective Techniques in the focus groups. We will introduce photos and use techniques such as word association and third person technique. Participants will be asked to look at photos and associate different types of people with the new concept/packaging and taste. This technique would be especially useful since it is a premium product and hence would help in measuring whether it succeeds in appealing to the higher sensibilities of the consumers. This will help us understand the motivations of consumers in consuming the category. It may also help in forming a platform for promotion message building directed at the target market. We appreciate the general feeling that Projective techniques in themselves may not provide any robust insights and are not considered as method of choice to study consumer motivation, nor do these techniques provide all the tools for such studies. Though they do help a researcher uncover feelings, beliefs, attitudes and motivation which many consumers find difficult to articulate and explain (Donoghue, 2000). In an experience based category like herbal tea, these techniques will be worthwhile to use. Questionnaire Based Survey Administered surveys are important to cover a larger sample base and also gain information on aspects which cannot be covered through qualitative measures. It would aim at profiling tea drinkers and non drinkers demographically (Revive being a health based premium offering income, age and gender profiling gains major importance), assess their eating habits (and mainly tea drinking habits in case of tea drinkers and probability of drinking tea in case of non drinkers) and shopping habits, price they would be willing to pay for the product and the optimum pack size for first trials (which would help you in the launch promotions). It would be also important to analyze whether consumers shift from other beverages to herbal tea given its benefits and increasing health consciousness (The Observer). The survey questionnaire would be designed based on the above aspects and the inputs we receive in the FGDs. It would include a screener to ensure data collection from a representative sample. Alternate Techniques An alternative to Focus Group discussions is Online Focus Group discussion. We can also replace the normal taste test with blind taste test. We can also take help of depth interviews to get in-depth understanding of consumers on a one-to-one basis. Online focus Group discussions are hard to monitor and they are quite impersonal to gauge customer reaction, which in a way hinders the qualitative assessment associated with focus group discussions. They are also not a good way to reach non-computer literate consumer base and need additional infrastructure (Wright, 2005). We will also miss out on experiential elements which are essential to a product category like tea. Blind taste tests can be a good medium but here we want to establish the taste perceptions of just our brand and get qualitative feedback on taste comparison. Blind taste test also requires additional product samples to be used which will have additional time and cost implications. Hence we recommend doing normal taste test. Depth interviews are a good option but are costly and time consuming exercise. Given the budget constraint and quick turnaround time of the project we recommend conducting focus group discussion which will allow us to combine the discussion with taste test and use our projective techniques as well. Internet and in-venue surveys would help in accumulating additional information through a larger sample thus optimizing results and providing an all round analysis. This combination will provide us with a robust solution on the research front and also help us overcome the various limitations like time and budget restrictions. Sampling: Focus Group Discussions Target population: Health conscious people (18-55 years) and tea drinkers Sampling frame: Our database for each city Sampling method: The sampling would be a combination of Stratified sampling: since the respondents of Focus Group have to meet the criteria of being tea drinkers Quota sampling: to cover the entire target age group and both the genders Sample size: 90 Quotas: Since females are the primary shoppers in UK (Lake) as well as prominent consumers of herbal tea, their quota is kept higher than males. The quotas would be as follows: Gender Age Group Quota Female Young Adults, 12-29 years 24% Older Adults, 30- 40 years 20% Middle Aged, 41- 55 years 23% Male Young Adults, 12-29 years 10% Older Adults, 30- 40 years 13% Middle Aged, 41- 55 years 10% The sample will be sourced equally from North, South and Midlands (33% each) to ensure uniformity and non-biased result due to skewed sample. The group discussions will be carried out in the following scheme- Group 1: South young adults 18 29, (3 males, 7 females) Group 2: South older adults 30 40, (4 males, 6 females) Group 3: South middle aged 41 55, (3 males, 7 females) Group 4: North young adults 18 29, (3 males, 7 females) Group 5: North older adults 30 40, (4 males, 6 females) Group 6: North middle-aged 41 55, (3 males, 7 females) Group 7: Midlands young adults 18 29, (3 males, 7 females) Group 8: Midlands older adults 30 40, (4 males, 6 females) Group 9: Midlands middle aged 41 55, (3 males, 7 females) Survey Target population: Health conscious people (18-55 years) Sampling frame: Our database for each city (for in-venue surveys) and Internet Panel for Online surveys. Sampling method: Quota sampling, to cover the entire target age group and both the genders Sample size: A sample of 1200 would be distributed equally between In-venue Surveys (600) and Online surveys (600) Quotas: The survey questionnaire would be administered among both tea drinkers (75%) and non drinkers (25%). It would span 1200 respondents (400 from each city 100 males, 300 females). This will ensure a proper coverage of the target consumer groups and thus provide us with robust results. Data Collection and Analysis: Our team will record, transcribe and analyze each of the group discussions and use their results for the final recommendations. The results will be categorized and presented to reflect the views of each demographic group separately and on a combined level to give a holistic view of consumer perception and preference. The taste tests and projective techniques will also be analyzed and combined with the results of the overall FGDs to come up with a complete solution as required by you. Imbibing the learning from the opinions and ideas that come out in the study, the final report will be a complete guide that will help TLMTC launch Revive successfully in the market. It will provide adequate consumer insights and marketing cues to help your team in strategizing a successful launch. The questionnaires would be administered both in person and through internet (50% 50%).Personal interviews would be conducted at strategic venues; essentially data would be collected from outside retail outlets (hypermarkets/ supermarkets distributions channels for Revive) and cafà ©s as they would help in reaching out to our main target market, i.e. shoppers and tea/brewed beverage consumers respectively. Internet interviews would save time and cost, at the same time in-venue surveys would optimize sample representation. Deliverables: We will submit 4 (four) hard copies and an electronic copy of the report as requested by TLMTC at end of the study. The report will provide in-depth analysis and report the facts and insights that we gather from the exercise. It will also discuss the recommendations we will make and explain the rationale of the same. We will also clearly spell out the limitations (if any) of the study. As requested we will also do a PowerPoint presentation of the key results at your head offices one week after the final report is approved. We understand that the audience at the presentation will be members from the marketing team who would be more interested in the key takeaways and action points. As such, we will only present the top-line findings and recommendations at the presentation. Timing: We assume that the proposal will be accepted by second week of May 2011 and we will be able to start work from third week of May around 16 May, 2011. The project will take approximately 8 weeks to finish after the proposal is accepted. We plan to finish-off the final presentation by 11 July, 2011 so that your marketing team gets ample time to execute the recommendations for an Autumn launch. Tasks Start date Duration (in number of working days) End date Set up focus groups 16.05.2011 5 20.05.2011 Focus Group Discussions 23.05.2011 5 27.06.2011 FGD Data Analysis 30.05.2011 7 07.06.2011 Compiling Report 08.06.2011 5 14.06.2011 Set up Questionnaire 15.06.2011 3 17.06.2011 Field work 20.06.2011 5 24.06.2011 Survey data Analysis and Report 27.06.2011 7 05.07.2011 Submission of Final Report 06.07.2011 1 06.07.2011 Review of the report and feedback 07.07.2011 2 08.07.2011 PowerPoint Presentation 11.07.2011 1 11.07.2011 Budget The total cost of the project is estimated at  £58,500 as follows: Task Cost/unit No.s Total Cost Focus Group Discussions ( 2 hours each)  £3,000 9  £27,000 In-venue Interviews  £24 600  £14,400 Internet Interviews  £13.5 600  £8,100 Project management/ Data processing  £9,000 Total  £58,500 We have tried to adjust the cost of the project under the budget limit indicated by TLMTC in the research brief.

University Exclusivity Essay -- Education Argumentative Persuasive Ess

University Exclusivity This country that we live in, the United States of America, has a reputation as being the "land of opportunity." Foreigners and native-born citizens regard this land as the pot of gold at the rainbow's end for those individuals who wish to make a life for themselves through hard work and perseverance. Yet for many minorities and economically disadvantaged people, the dream is unfulfilled because the educational opportunities that they need are unavailable. The universities are as unreachable as top- shelf merchandise in a warehouse without ladders or lifts. They are no less unwelcoming than heavy steel doors slamming shut in the face of a visitor. The selections from The Presence of Others: Voices that Call for Response collectively give the reader a snapshot of which individuals are being excluded, and why. The role and responsibility of the university must be established, and areas in need of change should be explored. Historically, racism has prevented many from ever having the opportunity to move a tassel across their forehead. To rectify this situation, minority based schools were established. Affirmative action policies made their way into colleges all over the country and quickly became policy in many states. However, Shelby Steele pointed out that these policies may actually hinder more than they help. He believed that policies giving preference to anyone based on race alone actually increase the racial tension between minority and non-minority groups (75). He also wrote that such policies are only part of the problem. The fear of racial hatred may prevent prospective students from even attempting to attend college. He cites instances of blatant racial harassment even on campuses in which "b... ...ryone must be assigned an equal designation of worth. No one person is more deserving of an education than another. To deny the opportunity to anyone based on such criteria as class, race, gender or ability is to tip the scales and make some people less deserving than others. Universities cannot have license to do this. To all who would listen, let them learn. Works Cited Lunsford, Andrea A. and Ruszkiewicz, John. The Presence of Others: Voices that Call for Response. New York: St. Martin's Press, 1997. Brooks, Gwendolyn. "We Real Cool." Lunsford 147. Hooks, Bell. "Keeping Close to Home: Class and Education." Lunsford 85-96. Rich, Adrienne. "What Does a Woman Need to Know?" Lunsford 44-51. Rose, Mike. "Lives on the Boundary." Lunsford 97-111. Steele, Shelby. "The Recoloring of Campus Life." Lunsford 63-84.

Do Creationism and Intelligent Design Have a Place in the Classroom? Es

Surveys show that fifty percent of adults in Turkey, forty percent in the USA and fifteen percent in the UK reject the theory of evolution and believe that life on Earth came into existence as described in the religious texts (Jones and Reiss, 2007; Miller; Scott and Okamoto, 2006; Lawes, 2009). President G. W. Bush commented as follow: Both sides ought to be taught properly...so people can understand what the debate is about....Part of education is to expose people to different schools of thoughts....You’re asking me whether or not people ought to be exposed to different ideas, and the answer is yes (Baker and Slevin, 2005). However other views have been reported in the literature. Pennock (2007: 72) summarizes his position as follows: What should be educators’ and citizens’ response when IDC’s lobby in Kansas and elsewhere to ‘teach the controversy’? We should respond with a slogan of our own: Teach only real science in science classes, not creationist pseudoscience. Jackson in his essay â€Å"The Personal and the Professional in the Teaching of Evolution† shares similar opinions (2007). In 2006, The Times published an article by Halpin reporting the inclusion of creationism in a new biology syllabus produced by the OCR exam board. James Williams, science course leader at Sussex University's School of Education, told the Times Educational Supplement: "This opens a legitimate gate for the inclusion of creationism or intelligent design in science classes as if they were legitimate theories on a par with evolution fact and theory.† The OCR exam board argued that the aim of the syllabus was to make students aware of scientific controversy in accordance to the QCA guidelines (QCA, 2007: 37): Students should be taught how scientif... ...theory and the notion of an old Earth/universe are supported by a mass and evidence and fully accepted by the scientific community (DCSF, 2007). It seems unreasonable to say that creationist explanations and beliefs lie outside the science classroom and will not be addressed without any further discussion (Anderson, 2007; Smith, Siegel and McInerney, 1995). Addressing the validity of evolution or issues about creationism and intelligent design in science lessons could be valuable when illustrating the aspects of how science works such as how scientific knowledge and scientific ideas evolve and how the scientific community invalidates those changes. The role of effective teaching is surely to help students learn about the theory of evolution and appreciate the ways of science, its limitations and how scientific knowledge might differ from other forms of knowledge.